PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
November 17, 2010Polymer International82 citations

Aminolytic depolymerization of poly(ethylene terephthalate) waste in a microwave reactor

View Full Paper
DADimitris S. AchiliasGTGeorgia TsintzouANAlexandros K. Nikolaidis

Key Points

Key points are not available for this paper at this time.

Abstract

Abstract The aminolytic depolymerization of poly(ethylene terephthalate) (PET) taken from waste soft‐drink bottles, under microwave irradiation, is proposed as a recycling method with possible substantial energy savings. The reaction was carried out with ethanolamine and without the use of any other catalyst in a sealed microwave reactor in which the pressure and temperature were controlled and recorded. Experiments under constant temperature or microwave power were carried out for several time periods. The main product, bis(2‐hydroxyethyl) terephthalamide, was identified from Fourier transform infrared (FTIR) spectra and DSC measurements. It was found that PET depolymerization is favoured by increasing temperature, time and microwave power. The average molecular weight of the PET residues, determined using viscosity measurements, was found to decrease with the percentage of PET degradation, indicating a random chain scission mechanism to some extent. From a simple kinetic model, the activation energy of the reaction was evaluated. Complete depolymerization was found to occur in less than 5 min when the irradiation power applied was 100 W or the temperature was 260 °C. These results support the use of microwave‐assisted aminolytic degradation as a very beneficial method for the recycling of PET wastes. Copyright © 2010 Society of Chemical Industry

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Achilias et al. (2010) studied this question.

synapsesocial.com/papers/6a6fe26e660549caf2c46d8ahttps://doi.org/10.1002/pi.2976
Ask AI
Helpful
Bookmark
Share
View Full Paper