Aim: The aim of this experimental pilot study was to evaluate the effect of pore volume and material composition on bone ingrowth into a resorbable poly-L-lactide-CaCO3 / CaP scaffold. Materials and Methods: Scaffolds with 35.9 and 41.1% porosity were produced through selective laser sintering of poly-L-lactide-powder with 24% CaCO3 spherulites with and without surface modification with 4% CaP. Six minipigs received the four types of macroporous cylindrical scaffolds, inserted press fit into trephine defects of the tibial metaphyses and left to heal for 4 and 13 weeks in three animals each. Specimens were evaluated using µCT for pore volume fill and histomorphometry for bone formation as well as immunohistochemistry for expression of osteocalcin. Results: After 4 weeks, newly formed bone ranged from 2.73 mm² to 5.28 mm² mean total area. Mean pore volume fill varied between 12.25% and 20.35 % and the average level of osteocalcin expression ranged from 2.49 mm² to 4.48 mm² mean total area. No significant differences were found between the different scaffolds. After 13 weeks, bone formation and pore fill volume had significantly increased in all scaffold groups up to a mean value of 14.79 mm² and 96.04%, respectively. Again, differences between the groups were not significant. Conclusion: The tested SLS produced scaffolds allowed for bone ingrowth that almost completely filled the pore volume after 13 weeks and was in direct contact with the scaffold walls. Differences in pore volume and scaffold composition did not account for significant differences in bone formation inside the scaffolds.
Kauffmann et al. (Thu,) studied this question.