In the new digital era, industrial robots are central to machining and flexible production in intelligent manufacturing. However, the rigidity of the six degrees-of-freedom (DOFs) serial robot is insufficient, which leads to chatter during machining and limits its application in high-precision machining, especially in the field of drilling, reaming and milling. A new method was proposed for modeling the global stiffness of the robot drilling system that incorporated the end-effector. Based on the virtual joint method and linear superposition principle, and considering the flexibility of the robot arm, the global stiffness model of the robot drilling system was established by simplifying the modeling process with dual quaternion. The results of the model validation experiments of deformation show that the maximum relative error of resultant end deformation is 8.80%, and the average relative error of resultant end deformation is 7.21%. This method provides a new method of global stiffness modeling for the robot drilling system, including the end-effector, and a new approach for stiffness improvement to overcoming the problem of insufficient robot stiffness in intelligent manufacturing industry.
Zhang et al. (Tue,) studied this question.