Key points are not available for this paper at this time.
The aim of this work was to investigate the influence of different combinations of engine oil and oil additive as well as additivated and unadditivated fuel on particulate emissions in gasoline engines. To accomplish this, load, speed, and type of oil injection were varied on a single-cylinder engine, and the influence on particle number concentration and size distribution were evaluated. The tests were supplemented by an optical investigation of their in-cylinder soot formation. The investigation of fuel additives showed no significant differences compared to the reference fuel without additives. However, in the case of oil additives, detergents led to a significant increase in the number of particles in the 20 nm range. This effect occurred when used as both a single additive and a component in the standard engine oil. While viscosity improvers also lead to a measurable, but less pronounced, increase in the particle number concentration, no significant influence can be determined for any other oil additives. The influence of the additive is independent of the type of oil introduction by injection into the intake manifold or direct injection of a premixed oil/fuel mixture.
Böhmeke et al. (Thu,) studied this question.