Key points are not available for this paper at this time.
The reservoir in the Shunbei field is characterized by ultra-deep, ultra-high temperature, and ultra-high pressure. During the drilling process, the circulating temperature at the bottom of the well is higher than the temperature resistance of downhole instruments, which leads to frequent problems of device burnout and no signal. Therefore, it is of great significance to accurately predict the wellbore temperature field of ultra-deep directional wells. In this paper, the influence of the drilling string assembly, the flow channel structure and the flow pattern on the convective heat exchange coefficient is considered. Based on the energy conservation equation, a numerical model of wellbore-formation transient heat transfer is developed. Then, the model was verified by the real data of two ultra-deep wells in Shunbei block, China, and the results showed that the prediction errors of bottom-hole temperature were all within 2%. Finally, the key factors and rules of the wellbore annulus temperature are analyzed. The results show that the bottom-hole temperature decreases with the decrease of inlet temperature, the thermal conductivity of drilling fluid, and the thermal conductivity of drill pipe, and increases with the decrease of flow rate, the density of drilling fluid, viscosity of drilling fluid, and specific heat capacity of drilling fluid. The inlet temperature has the greatest influence on the outlet temperature, and the specific heat of the pipe string has a minor influence on the wellbore annulus temperature. The research results of this paper provide an accurate wellbore temperature field prediction method for ultra-deep directional wells in the Shunbei block, China, which is of great significance for temperature-controlled drilling.
Dang et al. (Thu,) studied this question.