Key points are not available for this paper at this time.
This study investigates the impact of infill density on the mechanical properties of fused deposition modeling (FDM) 3D-printed polylactic acid (PLA) and PLA reinforced with carbon fiber (PLA+CF) specimens, which hold industrial significance due to their applications in industries where mechanical robustness and durability are critical. Exposure to cooling lubricants is particularly relevant for environments where these materials are frequently subjected to cooling fluids, such as manufacturing plants and machine shops. This research aims to explore insights into the mechanical robustness and durability of these materials under realistic operating conditions, including prolonged exposure to cooling lubricants. Tensile tests were performed on PLA and PLA+CF specimens printed with varying infill densities (40%, 60%, 80%, and 100%). The specimens underwent tensile testing before and after exposure to cooling lubricants for 7 and 30 days, respectively. Mechanical properties such as tensile strength, maximum force, strain, and Young’s modulus were measured to evaluate the effects of infill density and lubricant exposure. Higher infill densities significantly increased tensile strength and maximum force for both PLA and PLA+CF specimens. PLA specimens showed an increase in tensile strength from 22.49 MPa at 40% infill density to 45.00 MPa at 100% infill density, representing a 100.09% enhancement. PLA+CF specimens exhibited an increase from 23.09 MPa to 42.54 MPa, marking an 84.27% improvement. After 30 days of lubricant exposure, the tensile strength of PLA specimens decreased by 15.56%, while PLA+CF specimens experienced an 18.60% reduction. Strain values exhibited minor fluctuations, indicating stable elasticity, and Young’s modulus improved significantly with higher infill densities, suggesting enhanced material stiffness. Increasing the infill density of FDM 3D-printed PLA and PLA+CF specimens significantly enhance their mechanical properties, even under prolonged exposure to cooling lubricants. These findings have significant implications for industrial applications, indicating that optimizing infill density can enhance the durability and performance of 3D-printed components. This study offers a robust foundation for further research and practical applications, highlighting the critical role of infill density in enhancing structural integrity and load-bearing capacity.
Hozdić et al. (Mon,) studied this question.