Key points are not available for this paper at this time.
Pipeline transport is the main method of moving volumes of oil and oil products, as it has several advantages, for example, quality safety and high throughput. At the same time, it also has some disadvantages, which can include the difficulty of increasing throughput without high capital investments and possible leaks and unauthorized tie-ins into pipelines, which are sometimes difficult to identify. Looping is one of the main ways to increase the throughput of the existing pipeline system, when the need to increase the volume of oil and oil products supplies requires the construction of several parallel pipelines — looping. At the same time, the basic mathematical model for calculating the section of the trunk oil pipeline with looping does not fully cover all the physical processes associated with the distribution of flows in the parallel section, which arise due to turbulences in the connection nodes, as well as head loss along the length of the jumpers. Taking into account the resulting flow redistributions, it becomes difficult to detect a potential leak, since any of the detection methods can not solve the problem with high accuracy with determining the leak coordinate with an unknown distribution of fluid flow rates in a parallel section. As part of the study, an updated mathematical model of the oil export pipeline section with looping was developed, which took into account the presence of a potential leak in the parallel section. Mathematical modeling was carried out on the basis of the assumption of a known coordinate, the effect of leakage on the redistribution of flows in a parallel section was estimated. To assess the impact of the leak, various coordinates and volumetric flow rates were set, based on the calculation results, graphs of the flow rate in looping versus its length and internal diameter were plotted. The study is the initial phase of developing a hydraulic location leak detection system for the oil export pipeline section with looping. The need to refine the mathematical model for determining the flow rate in the parallel section is an urgent and necessary task, the solution of which will allow identifying potential leaks with reliable accuracy.
Vanchugov et al. (Mon,) studied this question.