Key points are not available for this paper at this time.
In order to provide a basis for the structural analysis, design and maintenance of permeable asphalt pavements, and to promote their engineering promotion and application, this study investigated the dynamic viscoelastic properties of permeable asphalt mixtures (PAC-13) under complex stress states. A Simple Performance Tester (SPT) system was used to measure the dynamic modulus of the mix under complex stress states. The displacement factor and principal dynamic modulus curves were formed by fitting Sigmoidal functions and using 1stOpt (first optimization) software, the phase angle principal curves were further determined, and the dynamic modulus was predicted for the ambient phase (15-25 °C) using the Hirsch model. The results showed that the dynamic modulus of the mixtures decreases with an increasing temperature, and the maximum decrease in the dynamic modulus is 93% when the confining pressure is 100 kPa and the loading frequency is 10 Hz. The dynamic modulus increases with an increasing confining pressure and loading frequency, the maximum increase with an increasing confining pressure is 26.1% when the temperature is 25 °C and the loading frequency is 10 Hz, and the maximum increase with an increasing loading frequency is 411% when the temperature is 25 °C and the confining pressure is 100 Hz. The dynamic modulus has a strong frequency dependence at low temperatures, while it is stress-dependent at high temperatures. Meanwhile, based on the Hirsch model, a new modified prediction model was developed, which can well predict the dynamic modulus of permeable asphalt mixtures at room temperature.
Yan et al. (Tue,) studied this question.