Key points are not available for this paper at this time.
The measurement of beam emittances by extracting the quadrupole mode signal from a 4 plate beam position monitor (BPM) was published at least 40 years ago.Unfortunately, in practice, this method suffers from poor signal to noise ratio and requires a lot of tuning to extract out the emittances.In this paper, an improved method where multiple BPMs are used together with better mathematical analysis is described.The BPM derived emittances are then compared with those measured by the Ion Profile Monitor (IPM).Surprisingly, the BPM measured emittances behave very well and are more realistic than those measured by the IPM.
Tan et al. (Fri,) studied this question.