Key points are not available for this paper at this time.
To enhance the accuracy of phase measurement and to prevent tracking errors, it is crucial to effectively read the multi-frequency signal in space gravitational wave detection. In this paper, a novel signal acquisition method called the multi-frequency acquisition algorithm is proposed and implemented. Different from the traditional single-frequency acquisition, the signal characteristics of amplitude and frequency are both considered to better distinguish different frequency components. A phasemeter integrated with the acquisition method and narrow-bandwidth digital phase-locked loop is constructed for the method test and verification. The results show that the multi-frequency acquisition unit can capture all the frequencies of an input signal in several milliseconds. The precision is better than ±200 Hz under a low SNR (signal-to-noise ratio) of 0 dB. The phase noise can reach 2 µrad/Hz1/2 in the frequency range of 0.1-1 Hz and satisfy the requirement of the space gravitational wave detection in all frequency ranges.
Zhang et al. (Wed,) studied this question.