Key points are not available for this paper at this time.
In the present work, the investigation of the structural, dielectric, ferroelectric and energy storage properties of polycrystalline samples of (1-x)BaTiO3 – xEuTiO3 (BT-ET) solid solution materials prepared by conventional solid-state reaction method has been carried out. X-ray diffraction analyses have revealed the formation of a single-phase tetragonal structure with the P4mm space group. Furthermore, the temperature dependence of the dielectric constants marked the presence of the following sequence of structural phase transitions, namely from rhombohedral to orthorhombic, from orthorhombic to tetragonal and from tetragonal to cubic phase transitions with the increase of temperature. A diffuse phase transition has been observed from the dielectric permittivity peak and has been analyzed using the modified Curie-Weiss law and the degree of diffuseness is found to be in the range of 1.16 - 1.76 due to the existence of different states of polarization. A phase diagram has been established based on the temperature-dependent dielectric permittivity studies. The room temperature ferroelectric properties point to a coercive field larger than that of BaTiO3 ceramics. Broad dielectric peaks associated with diffuse phase transition appear in a wide temperature range (40 - 100 °C) with the highest dielectric permittivity ε' = 6498 found in the x = 0.05 ceramics. Moreover, an improved energy storage performance is obtained in the 0.95BaTiO3-0.05EuTiO3 ceramic with a recoverable energy density of Wrec = 0.797 J/cm3, coupled with an efficiency η = 73% at 170 kV/cm and the highest storage energy density of Wst = 1.571 J/cm3 is obtained for 0.90BaTiO3-0.10EuTiO3, which is superior to other lead-free BT-based ceramics. All these features demonstrate that the BT-ET ceramics can be widely used in energy storage applications and also in high-temperature multilayer capacitors for automotive, aerospace and related industries.
Claire et al. (Tue,) studied this question.