Key points are not available for this paper at this time.
Abstract In this paper, we present a finite elasto-plasticity theory for large plastic deformations. For the elastic part of the model, we use the St. Venant–Kirchhoff elasticity. The plastic part is described by the isomorphy concept, the yield condition is covered by the isotropic J₂ J 2 theory of (Huber in Czas Techn 22: 34, 1904; von Mises in Math Phys 4: 582–592, 1913) and (Hencky in ZAMM 9: 215–220, 1924), and the yield condition uses the principle of maximum plastic dissipation. The numeric of this theory is discussed and finally implemented in a Fortran code to use it as material law in the UMAT subroutine of the finite element program Abaqus. The material law is validated using different test calculations like tensile and shear tests as well as a large deformation simulation compared to the Abaqus internal material law. Further, we apply this material model to determine the effective material stiffness tetrad of large deformed inhomogeneous materials. For these purposes, we additionally present an automated method for determining material stiffnesses of an arbitrary material in Abaqus.
Weber et al. (Tue,) studied this question.