Key points are not available for this paper at this time.
In the electrostatic precipitation of microparticles, it is common to evaluate the voltages between the corona onset voltage and the breakdown point. However, the charging of particles in the nanoscale size range mainly occurs by diffusion, suggesting the possibility of its occurrence, even at low values. This paper investigates the implications of a wide range of electric fields applied in the collection of nanoparticles (6.15–241.4 nm). Two electrostatic precipitators (P.I. and P.II.), both with plates 10 cm high and 30 cm long, but with different plate spacings (4 and 6.5 cm), were tested using three air velocities (1.9, 2.9, and 3.9 cm/s) and 36 electric fields (0.0 − 5.0 kV/cm). Under the highest electric fields, both precipitators showed efficiencies above 99.9%. Furthermore, nanoparticles were collected before the corona onset voltage, with efficiencies of around 28% (P.I.) and 35% (P.II.). Even though no current was detected by the high voltage source, charges on the particles were measured in electric fields lower than 3.0 kV/cm. The higher the applied voltage, the higher the residual charge of the particles at the precipitator outlet. It is expected that the findings of this work should contribute to the technological development of electrostatic processes for air treatment.
Lima et al. (Sat,) studied this question.