Broadband high-efficiency plasmonic metalens with negative dispersion characteristic

Controlling the dispersion characteristic of metasurfaces (or metalenses) along a broad bandwidth is of great importance to develop high-performance broadband metadevices. Different from traditional lenses that rely on the material refractive index along the light trajectory, metasurfaces or metalenses provide a new regime of dispersion control via a sub-wavelength metastructure, which is known as negative chromatic dispersion. However, broadband metalenses design with high-performance focusing especially with a reduced device dimension is a significant challenge in society. Here, we design, fabricate, and demonstrate a broadband high-performance diffractive-type plasmonic metalens based on a circular split-ring resonator metasurface with a relative working bandwidth of 28.6%. The metalens thickness is only 0.09 λ 0 ( λ 0 is at the central wavelength), which is much thinner than previous broadband all-dielectric metalenses. The full-wave simulation results show that both high transmissive efficiency above 80% (the maximum is even above 90%) and high average focusing efficiency above 45% (the maximum is 56%) are achieved within the entire working bandwidth of 9–12 GHz. Moreover, an average high numerical aperture of 0.7 ( NA =0.7 ) of high-efficiency microwave metalens is obtained in the simulations. The broadband high-performance metalens is also fabricated and experimental measurements verify its much higher average focusing efficiency of 55% (the maximum is above 65% within the broad bandwidth) and a moderate high NA of 0.6. The proposed plasmonic metalens can facilitate the development of wavelength-dependent broadband diffractive devices and is also meaningful to further studies on arbitrary dispersion control in diffractive optics based on plasmonic metasurfaces.