Acoustic emission characteristics and damage evolution of different rocks under uniaxial compression conditions

Abstract Due to the complexity of the strata, it is difficult to monitor and identify the disasters induced by rock fractures in the process of mining deep coal resources. This will seriously affect the safety and sustainable mining of coal. Therefore, it is necessary to understand the failure mechanisms and acoustic emission (AE) characteristics of different rocks. In this paper, uniaxial compression tests as well as simultaneous AE monitoring were carried out on four different rocks. The four rocks include yellow sandstone, white sandstone, marble and limestone. The mechanical properties, energy evolution and AE characteristics of different rocks were analysed. It is found that the AE response of rocks is closely related to the damage and fracture process. The more brittle the rock is, the less energy is dissipated before failure, and the less obvious the AE precursor is, and the RA - AF values can effectively characterise the failure modes of different rocks. Finally, the damage models were developed from the perspectives of AE energy and dissipated energy, respectively. The damage model based on dissipated energy can better reflect the stress and damage state of the rock, and the theoretical curves of stress–strain are in good agreement with the measured curves.