Chemical composition and structural features of cellolignin from steam explosion followed by enzymatic hydrolysis of Eucalyptus globulus bark

Bark is one of the main wastes of the chemical and mechanical processing of Eucalyptus globulus wood. The proposed biochemical processing of bark via saccharification pathway involves steam explosion (SE) pretreatment (severity factor log R0 of 4.22) followed by enzymatic hydrolysis using an enzymatic cocktail composed of cellulolytic and xylanolytic enzymes. Almost 70% cellulose saccharification was achieved. The remaining cellolignin residue (CLEZ) was analysed for its chemical composition and structural features by conventional wet chemistry methods and a series of spectroscopic tools (FTIR-ATR, solid-state CP/MAS 13C NMR spectroscopy and wide-angle X-ray scattering (WAXS)). The main CLEZ component (about 51%) is acid-insoluble lignin, the chemical composition of which in terms of the ratio of syringyl (S), guaiacyl (G) and p-hydroxyphenyl (H) units (70:28:2) is very close to that in the initial bark. This lignin is highly condensed and structurally associated with condensed tannins, which makes CLEZ recalcitrant to delignification by common methods. About one third of cellulose in eucalyptus bark after SE was inaccessible to enzymatic hydrolysis and remained in the CLEZ. This cellulose, structurally similar to microcrystalline cellulose, is imbedded into the lignin-tannins condensed matrix and extremely difficult to purify. In contrast to cellulose, bark hemicelluloses were effectively removed in enzymatic hydrolysis, with only small amounts (<2%) remaining in CLEZ. Among other CLEZ ingredients, proteins and inorganic/organic salts were the most abundant. The latter includes noticeable amounts of calcium oxalate phytoliths (up to 9%), Fe and Si salts. The eventual application areas of CLEZ are discussed.