Abstract Iron boride coatings were developed on AISI H13 hot work tool steel using the electrochemical boriding method at temperatures of 850, 950, and 1050 °C for durations of 2, 4, and 6 h. The process was conducted at a current density of 200 mA/cm 2 , utilizing a powder mixture containing 22.5 wt.% ferroboron (Fe-B), 70 wt.% borax (Na 2 B 4 O 7 ), and 7.5 wt.% ammonium chloride (NH 4 Cl). The obtained coatings were examined using light microscopy (LM), scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS), and X-ray diffraction (XRD). Metallographic analysis revealed a distinct saw-tooth shaped interface between the boride layer and the underlying transition zone, which was consistent and uniform across the examined area. XRD results revealed the formation of a dual-phase boride layer (FeB/Fe 2 B) with traces of chromium and vanadium borides. The kinetics of the boriding process were evaluated using the classical parabolic growth law, demonstrating a parabolic relationship between boride layer thickness and treatment time. The activation energy required for boron diffusion throughout the boride layer was determined to be 168.4 kJ/mol. Additionally, the microhardness and wear rate were evaluated. The boride layer reached a thickness up to 252 µm and exhibited a microhardness of 1956 ± 67 HV 0.05 , representing an increase of over 300% compared to the quenched and tempered specimens, which had a microhardness of 543 ± 8 HV 0.05 . The findings demonstrated that the phase composition and thickness of the boride coatings are strongly influenced by the immersion time and processing temperature.
Mourad et al. (Mon,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: