The results of experimental tests of six various water-lubricated bearings are described. Tests were performed under conditions typical for marine stern tube bearings. The acquired low-friction coefficient values indicated that the bearings operated in the fluid friction regime over a wide range of sliding speeds and loads. Due to elastic deformations of the flexible non-metal bushings, it was not possible to measure the lubricant film thickness to confirm this phenomenon. Studying measured hydrodynamic pressure distribution profiles, and thanks to lifting force calculation, it was proven that hydrodynamic phenomena occur between strongly deformed, rough surfaces lubricated by a low-viscosity fluid.
Wasilczuk et al. (Thu,) studied this question.