The hyperloop transportation system is a promising ultra-high-speed mobility solution operating in a reduced-pressure environment, where pod performance is governed by the coupled behaviour of structural integrity, aerodynamics, and electromagnetic propulsion. This paper presents the design, numerical analysis, and performance evaluation of a lightweight hyperloop pod equipped with a linear induction motor (LIM)-based propulsion and electromagnetic stabilisation system. The pod chassis was fabricated using Carbon Fibre-Reinforced Polymer (CFRP) and Aluminium 6061-T6, achieving a significant weight reduction while maintaining structural safety. Finite Element Analysis reveals a maximum von Mises stress of 82 MPa, which is well below the material yield strength, and a maximum deformation of 0.64 mm under worst-case loading conditions. Modal analysis indicates the first natural frequency at 47.6 Hz, ensuring sufficient separation from operational excitation frequencies. Computational Fluid Dynamics analysis conducted inside a rectangular tube shows a drag coefficient reduction of approximately 18% compared to a baseline blunt design, with stable velocity distribution and no flow choking at operating speeds. The optimised nose geometry enables rapid acceleration, achieving 25 km/h within 1.1 s in prototype testing. The LIM analysis demonstrates a peak thrust of 1.85 kN at an optimal slip range of 6–8%, with operating currents between 35 and 55A and power consumption of 18–25 kW. Thermal analysis confirms a maximum stator temperature of 78 °C, remaining within safe operating limits. The integrated numerical and experimental results confirm the feasibility, efficiency, and stability of the proposed hyperloop pod design.
Priya et al. (Wed,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: