This article presents a comparative analysis of waterproofing systems for wet zones in buildings, examining the performance of cement-based, polymer-modified, and combined waterproofing membranes under different operational conditions. The research synthesizes field observations from swimming pools, hotel bathrooms, and commercial kitchen installations in the Czech Republic over the period 2018–2024, combined with an analysis of 122 documented defect cases. The primary objective was to evaluate waterproofing system durability depending on material type, application environment, and compliance with technological protocols. Results demonstrate that two-component polymer-modified cement membranes achieve optimal performance across diverse environments, with 97.8% defect-free area in hotel bathrooms and 94.6% in swimming pools at 24-month observation. Single-component cement systems showed adequate results only in intermittent water exposure conditions, with 8.8 percentage point performance reduction under constant immersion. Polyurethane-based waterproofing proved essential for chemically aggressive environments, eliminating the 12% failure rate observed with cement membranes at commercial kitchen drain perimeters. The study quantified the impact of technological protocol adherence: installations with full compliance achieved 2.1% defect rate versus 41.2% for significant violations at 24 months. Substrate moisture exceeding 2.5% correlated with 78% of membrane delamination cases, while shortened waterproofing curing time (<24 hours) accounted for 23.4% of all documented failures. A four-checkpoint quality control protocol reduced defect rates by 76% and rework costs by 85%, delivering 380% return on investment. Practical recommendations include specification of 2K polymer-cement waterproofing for swimming pools with a minimum 48-hour curing, polyurethane substitution at drain perimeters in commercial kitchens, and mandatory moisture verification below 2.0% threshold before membrane application. The findings provide evidence-based guidelines for waterproofing system selection and installation quality control in wet zone applications.
Veniamin Kuchinka (Thu,) studied this question.