Layered nickel-rich cathodes are regarded as promising cathode materials for lithium-ion batteries (LIBs) due to their higher electrochemical capacities and lower cost. However, the development and commercial application of nickel-rich cathodes are severely hindered by significant capacity fading under a high charge cut-off voltage (4.5 V), which arises from interfacial instability and bulk structural degradation during charge–discharge processes. In this study, a two-step double-coating strategy was innovatively adopted to successfully synthesize Al2O3/LiBO2 co-coated LiNi0.71Co0.09Mn0.2O2 cathode material (denoted as NCM-Al/B). X-ray photoelectron spectroscopy (XPS) verified that Al existed stably in the form of Al3+, and B formed B-O-M covalent bonds with transition metals (Ni/Co/Mn), constructing a dual-element synergistic interface. This interface significantly reduced the surface Ni3+ content and enhanced the structural stability by suppressing the H2→H3 phase transition. The NCM-Al/B material exhibits excellent electrochemical performance: it maintains a remarkable cycling stability with a capacity retention of 91.6% after 100 cycles at 1 C and 25 °C and delivers a discharge capacity of 156.6 mAh·g−1 with a capacity retention of 75.4% after 100 cycles at a high rate of 1 C. This work establishes a chemically driven double-coating strategy and provides a new paradigm for optimizing the performance of high-nickel cathode materials.
Wei et al. (Thu,) studied this question.