Epoxy materials are an important class of thermosets whose properties strongly depend on the used formula, the curing parameters, and many available hardeners. Achieving desired properties such as enhanced thermal stability, extended lifetime, or self-regeneration requires selecting suitable precursors and carefully tuning curing conditions. In this work, a selected biphenyl epoxy precursor was used as a model compound to assess whether using different hardeners could be an effective factor in tailoring the elasticity of cured epoxy networks. We employed two chemically distinct hardeners—4,4′ diaminodiphenylmethane (DDM) and suberic acid—to generate materials with markedly different final properties. For instance, the glass transition temperature Tg varied within a range of over 35 °C. Two complementary experimental techniques were used in this paper to establish the optimal curing parameters: differential scanning calorimetry (DSC) and broadband dielectric spectroscopy (BDS). Both techniques supported tracking of changes in the mixture while curing and enabled determination of Tg in the obtained products. Dielectric relaxation spectroscopy revealed various molecular motions (α, β, and γ-processes) occurring in different phases, especially in glass-forming solids. BDS is therefore a good tool for testing new organic materials. The analytic route used in this work, based on a combination of calorimetric and electrical approaches, enables precise adjustment of the curing parameters to a specific hardener and helps verify the effects of using different hardeners on the elastic properties of the product. This allows the creation and modification of epoxy matrices towards modern materials, such as composites with self-healing properties or enhanced thermal stability.
Włodarska et al. (Sun,) studied this question.