Underwater rock plug blasting involves a highly complex, transient gas–liquid–solid multiphase flow that is difficult to simulate accurately with conventional single-phase models. To address this gap, a novel three-phase three-layer mathematical model is presented in this study. This model represents the stratified flow behavior by decomposing the conduit into an upper gas layer, a middle gas–liquid–solid mixture layer, and a lower consolidated bed layer. Governing equations for mass, momentum, and energy conservation are derived and solved using the finite volume method. The model is validated against physical model tests, showing a maximum gate shaft surge deviation of only 0.27%, a Pearson correlation coefficient of 0.965, and a relative RMSE of 4.2%. A sensitivity analysis is performed to quantify the influence of key operational water levels, including the reservoir, gate shaft, and slag pit, on critical transient loads. The results demonstrate that a decrease in the reservoir water level from 106 m to 86 m concurrently reduces both surge height and impact pressure. A smaller reservoir–shaft water level difference (5–15 m) increases the initial cushion pressure and amplifies the surge. In contrast, a larger level difference (20–30 m) suppresses surge but increases impact pressure. Furthermore, an excessively high water level in the slag pit (exceeding 47.8 m) weakens the cushioning effect, thereby lowering the impact pressure. The proposed multiphase model provides an improved approach for predicting hydraulic transients during underwater rock plug blasting.
Li et al. (Fri,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: