Key points are not available for this paper at this time.
View Video Presentation: https://doi.org/10.2514/6.2021-2510.vid Advancements in electric propulsion and the emergence of Advanced Air Mobility are driving the evolution of new aircraft designs. Since electric propulsion enables flexibility in propeller location, there is an increasing need for reliable, quick analyses of propeller-airframe interactions during the conceptual design phase. Many existing analysis tools capable of accurately modeling propeller-airframe interactions are computationally expensive and require a high level of expertise and significant time investment for setup. VSPAERO is a NASA-developed, open source, computational analysis tool that runs a Vortex-Lattice Method (VLM) solver and is targeted at conceptual design. This paper assesses the applicability of the VSPAERO VLM in the conceptual design phase by comparing VSPAERO predictions to predictions by OVERFLOW, a Reynolds-Averaged Navier-Stokes Computational Fluid Dynamics solver, and RoBIN, another VLM tool. The paper details the modeling, meshing, and analysis techniques used within VSPAERO. Analyses were performed for a wing in isolation, a propeller in isolation, and then for two propeller-blown wing configurations: one with a propeller located at the midspan and another with a propeller located at the wingtip. The propeller was modeled both as an actuator disk and as rotating blades.
Sheridan et al. (Wed,) studied this question.