Key points are not available for this paper at this time.
The phase behavior, including glass, devitrification, solid crystal melting, and liquid boiling transitions, and physicochemical properties, including density, refractive index, viscosity, conductivity, and air-liquid surface tension, of a series of 25 protic ionic liquids and protic fused salts are presented along with structure-property comparisons. The protic fused salts were mostly liquid at room temperature, and many exhibited a glass transition occurring at low temperatures between -114 and -44 degrees C, and high fragility, with many having low viscosities, down to as low as 17 mPa.s at 25 degrees C, and ionic conductivities up to 43.8 S/cm at 25 degrees C. These protic solvents are easily prepared through the stoichiometric combination of a primary amine and Brønsted acid. They have poor ionic behavior when compared to the far more studied aprotic ionic liquids. However, some of the other physicochemical properties possessed by these solvents are highly promising and it is anticipated that these, or analogous protic solvents, will find applications beyond those already identified for aprotic ionic liquids. This series of protic fused salts was employed to determine the effect of structural changes on the physicochemical properties, including the effect of hydroxyl groups, increasing alkyl chain lengths, branching, and the differences between inorganic and organic anions. It was found that simple structural modifications provide a mechanism to manipulate, over a wide range, the temperature at which phase transitions occur and to specifically tailor physicochemical properties for potential end-use applications.
Greaves et al. (Sat,) studied this question.