To address the vibration and noise issues induced by inertial forces in marine V-type air compressors during operation, this study systematically investigates inertial force balancing and optimization. Based on dynamic analysis, analytical expressions for the first- and second-order reciprocating inertial forces and the rotating inertial force under unbalanced conditions are precisely derived. Considering the characteristics of a V-type air compressor with a V-angle of γ = 60°, the synthesis model of the first-order reciprocating inertial force is modified. The positive–negative rotating wheel system method is employed for preliminary balancing design, and the rigid–flexible coupling dynamics theory is innovatively introduced to construct a high-precision multi-body dynamics model that accounts for the flexible deformation of the crankshaft and connecting rod. Through joint simulation using ANSYS(2024R1) and Adams(2024.2), the dynamic responses of the pure rigid-body model and the rigid–flexible coupling model are compared to determine the optimal balancing configuration. The Adams/Insight module is utilized to perform multi-objective optimization of the balance iron mass. Results indicate that the rigid–flexible coupling model more accurately reflects the dynamic characteristics of the air compressor compared to the pure rigid-body model, significantly enhancing simulation accuracy. The optimized balance iron configuration effectively suppresses system vibration, with the peak X-direction bearing reaction force decreasing from 3750 N to 3610 N (a reduction of 3.7%), the vibration intensity reducing by 45.3%, and the radiated noise sound power level decreasing by 7.45%. This study provides a systematic theoretical approach and technical pathway for vibration and noise reduction, as well as for structural reliability design of marine air compressors.
Feng et al. (Tue,) studied this question.