The continuous drive for higher efficiency in gas turbines has led to increased combustion temperatures, making the thermal shock resistance of thermal insulation tiles a critical factor limiting performance. Corundum–mullite multiphase ceramics are widely used in such applications; however, their performance is often constrained by an inherent trade-off between mechanical strength and thermal shock resistance. In this work, a synergistic modification strategy based on rare-earth disilicate phases was developed, wherein Y2O3 and SiC were incorporated into a corundum–mullite matrix to enable in situ formation and controlled distribution of Y2Si2O7 via gel casting. During sintering, Y2Si2O7 acts as a transient liquid phase, facilitating densification and grain boundary strengthening; upon thermal shock, it migrates to fill and heal grain boundaries and microcracks, thereby significantly enhancing thermal shock resistance. The optimized sample S5, sintered at 1400 °C, exhibited a bulk density of 2.12 g/cm3 and a bending strength of 68.43 MPa. Notably, after 30 thermal shock cycles (air cooling from 1000 °C to RT), its bending strength increased to 79.71 MPa, corresponding to a 16.48% enhancement. This work provides an effective strategy for incorporating rare-earth disilicates into multiphase ceramics and offers valuable guidance for the development of high-performance components for gas turbines.
Wang et al. (Sat,) studied this question.