To explicitly illustrate the relationship between heliostat field optimization and power generation, a coupled model was established in Simulink. By optimizing the geometric layout of the heliostat field, the solar heat collection efficiency can be significantly improved, thereby increasing the thermal input to the system. The optimized heliostat field design can convert solar energy into thermal energy more efficiently and transfer it to the steam generator through the molten salt loop, thereby driving power generation in the Rankine cycle. In this process, the Rankine cycle is responsible for converting the thermal energy supplied by the molten salt loop into mechanical work and ultimately into electrical power output. At the same time, real meteorological data from a commercial heliostat field were introduced, and annual power generation simulations demonstrated that the integrated modeling of the heliostat field, thermal storage, and power block based on actual meteorological boundary conditions and system parameters can effectively reflect the power generation performance of a commercial tower solar thermal power plant. Meanwhile, research on heliostat field optimization should further evolve from identifying general patterns toward parameter design and overall system performance improvement. For molten-salt tower solar thermal power plants, key design variables such as receiver tower height, receiver dimensions, heliostat dimensions, and heliostat field spacing parameters affect not only the annual average optical efficiency of the heliostat field and the thermal power output of the receiver, but also the annual power generation of the entire plant. By integrating SOLARPILOT 1.5.2 and SAM 2025.4.16, the design variables were systematically analyzed to investigate their effects on the annual average optical efficiency of the heliostat field, the number of heliostats, the receiver output power, and the annual power generation, and the reasonable value ranges of the heliostat field parameters were determined accordingly. The established Rankine cycle power block model was then coupled with the parameter optimization results to carry out a secondary optimization of the initial heliostat field. Through the above study, the aim is to realize a shift from single-objective geometric optimization of the heliostat field to comprehensive optimization oriented toward annual plant power generation performance and scenario adaptability, thereby providing a basis for scheme design and parameter selection of molten-salt tower solar thermal power plants. For external validation, the annual generation predicted for the Delingha 50 MW commercial plant was 142.15 GWh, corresponding to a relative deviation of 2.64% from the published design value of 146 GWh. This indicates that the coupled framework can reasonably capture the integrated response of the heliostat field, thermal storage system, and power block at the plant level. The model is therefore suitable for generation-oriented parameter screening and preliminary design of tower molten-salt CSP plants, while detailed component-level transient design still requires higher-fidelity engineering models.
Zhou et al. (Mon,) studied this question.