High-performance fiber-reinforced cementitious composite (HPFRCC) has shown considerable potential as a strengthening material for improving the crack resistance, integrity, and deformation capacity of masonry structures. In aging concrete hollow block masonry walls subjected to long-term eccentric compression, material degradation may lead to premature cracking, local crushing, stiffness deterioration, and reduced safety margins, thereby adversely affecting structural reliability and service performance. However, studies on the eccentric compression behavior of HPFRCC-strengthened concrete hollow block masonry walls with simulated material degradation remain limited. In this study, experimental, finite element, and theoretical analyses were conducted on three HPFRCC-strengthened specimens with an eccentricity ratio of 0.5y, namely a 30 mm double-sided strengthened specimen, a 45 mm double-sided strengthened specimen, and a 30 mm single-sided strengthened specimen. The failure modes, load–displacement responses, lateral deformation, strain development, and DIC strain distribution characteristics were investigated. The results showed that, under the test conditions considered in this study, the double-sided strengthened specimens exhibited higher load-bearing capacity, greater stiffness, and better structural integrity than the single-sided strengthened specimen. Among them, the 45 mm double-sided strengthened specimen reached the highest peak load of 1643 kN, whereas the 30 mm double-sided strengthened specimen exhibited a gentler post-peak response, more dispersed crack development, and better deformation compatibility. The finite element results were generally consistent with the experimental results; the ratios of the experimental to numerical peak loads ranged from 0.96 to 1.01, while the corresponding peak displacement ratios ranged from 1.02 to 1.09. Within the parameter range considered in the numerical analysis, increasing the strengthening thickness was generally beneficial to the eccentric compression capacity. The proposed preliminary sectional bearing capacity model showed acceptable agreement with the test results for the specimens considered in this study; however, its broader applicability requires further validation using additional specimens.
Wang et al. (Sun,) studied this question.