Since tires from end-of-life vehicles are not entirely biodegradable and pose a serious environmental problem, their disposal has become a significant global environmental concern. One technique to decrease these environmental issues is incorporating waste rubber to make sustainable green concrete. This study examined the usage of waste supplementary cementitious materials (SCMs) such as fly ash (FA), metakaolin (MK), marble powder (MP), slag (SL), and silica fume (SF) for surface precoating of crumb rubber (CR) to improve the mechanical properties of the produced crumb rubber concrete (CRC) by strengthening the bond between CR and cement paste in the interfacial transition zone (ITZ). The CR replaced (0, 15%, and 25%) of sand by weight in the preparation of CRC mixtures. A total of eleven CRC mixes were cast to investigate the fresh properties, compressive strength, and splitting tensile strength. In addition, the compressive stress-strain curve was investigated, and peak stress, peak strain, energy absorption, toughness, and modulus of elasticity have been evaluated. The outcomes showed that precoating CR using FA, followed by MK, has the strongest effect on increasing CRC compressive performance. The 25% substitution of sand with FA-treated CR increased compressive strength after 28 days, splitting tensile strength, peak stress, toughness, and modulus of elasticity by 34.7%, 23.7%, 34.8%, 26.1%, and 25.2%, respectively, in comparison to the same percentage of untreated CR. The proposed approach demonstrates a viable pathway for integrating waste materials and SCM-based technologies to develop high-performance, sustainable cementitious composites.
El-Wafa et al. (Sat,) studied this question.