Key points are not available for this paper at this time.
The development of larger Offshore Wind Power Plants (OWPPs) is moving towards multi-vendor setups, ultimately aiming to establish Energy hubs. These structures are characterized by installations from different vendors sharing the same connection or closely interconnected points. Control interactions among Wind Turbine (WT) converters and power systems have been detected, and this critical phenomenon can significantly impact the dynamic stability of the system. Various stability analysis methods have been proposed to analyze the interactions between OWPPs at the Point-of-Connection (PoC) and the power system. However, stability studies rarely consider the complex offshore transmission system behind the PoC. Generally, the overall OWPP is blamed for the instability. However, since it is a complex system, it is important to understand which part of the OWPP behind the PoC is causing the problem or is likely to become unstable under certain conditions. Therefore, this paper provides a detailed overview of the advantages and limitations of the current system screening indexes used to design the OWPP, and the stability analysis methods. Each method is discussed, and the appropriate methods, depending on OWPP structure, are evaluated and discussed. The analysis indicates that a combination of time domain and frequency domain methods is necessary for enhancing the definition of stability boundaries.
Mugambi et al. (Thu,) studied this question.