Carbon dioxide emissions are a major concern for coal-fired power plants. A capture and utilization method is highly demanded. The wastewater generated by a power plant contains a high concentration of Na+. Using wastewater salts to absorb carbon dioxide for sodium carbonate production is a promising strategy, as it can achieve carbon capture and utilization and wastewater resource utilization. However, the salt concentration in raw wastewater from coal-fired power plants is generally insufficient to achieve sustainable carbon capture; thus, concentrating the Na+ in the wastewater is key. In this study, desulfurization wastewater was investigated as a source of salts. The reverse osmosis (RO) process was selected for salt concentration. As wastewater is significantly complex and unsuitable for direct RO treatment, pre-treatment was conducted. For chemical oxygen demand (COD) removal, Fenton oxidation (49.7%) and electrochemical oxidation (49.3%) achieved better results than microelectrolysis (25.3%). Precipitation showed a strong ability to remove hardness. The removal efficiencies for Mg2+ and Ca2+ were 99.9% and 99.8%, respectively. It gave 8.6% COD removal as well. Additionally, 89.8% of ammonia was removed by stripping. To further decrease the pollutant concentrations, activated carbon was used for adsorption. RO then concentrated the pre-treated wastewater after nanofiltration. The final level of NaCl was 40.4 g/L after concentration. This was lower than that required to concentrate the water, which contained only NaCl. This is due to the presence of impurities left in the wastewater after pre-treatment. The study reveals that pre-treatment is essential to achieve the desired NaCl concentration in RO with the ultimate goal of CO2 capture.
石光 et al. (Tue,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: