Key points are not available for this paper at this time.
Background: In-line metrology for three-dimensional (3D) profiling high-aspect-ratio (HAR) features is highly important for manufacturing semiconductor devices, particularly for memory devices, such as 3D NAND and DRAM. Aim: Our purpose was to obtain the cross-sectional profiles of the HAR features from top-view critical dimension scanning electron microscopy (CD-SEM) images. Approach: Based on Monte Carlo simulation results, we proposed a method for 3D profiling of HAR features using backscattered electron (BSE) signal intensities. Several kinds of HAR holes with different taper angles and bowing geometries were fabricated. High-voltage CD-SEM was used for experiments to determine the feasibility of our approach. Results: Using the BSE line-profile, we constructed cross sections of the taper holes and estimated sidewall angles (SWAs), which were approximately the same as those observed using field-emission scanning electron microscopy (FE-SEM). The constructed cross sections of the bowing holes and the trends of the geometric variance, which were estimated by the middle CD and its depth, were consistent with the cross sections observed by FE-SEM. Conclusions: The results demonstrate that the variation in the HAR holes, such as SWA and bowing geometry, can be measured and monitored using the BSE images.
Sun et al. (Tue,) studied this question.