Key points are not available for this paper at this time.
Two Al-Cu-Mg(-Ag) aluminium alloys, having the same base composition of Al-5.11Cu-0.96 Mg-0.58Mn-0.12Zr (wt.%) but different Ag contents, 0 and 0.7 Ag (wt.%), and accordingly denoted 0A and 7A samples, were aged at 185 °C. In early-ageing, the formation of disk-like Mg-Cu and Mg-Ag nano(co–)clusters can be quantitatively examined by Small angle X-ray scattering (SAXS), respectively. In the prolonged ageing of the 0A samples, the thickening in the disk-like θ-precipitates leads to a lower aspect ratio. For S-precipitates, the change in the total surface area and the single-particle surface area indicates that the coalescence mechanism is prevalent from peak-ageing to over-ageing, and then after over-ageing, the precipitate coarsening dominates. The coarsening in S and θ precipitates presumably leads to a lower mechanical strength. Alternatively, in the aged 7A sample, the SAXS technique in conjunction with transmission electron microscopy (TEM) quantitatively reveals Ω-precipitates possessing a nearly constant thickness but an increase in diameter with ageing time. Additionally, the stable behaviors of the total surface and size of S-precipitates illuminate that the coalescence/coarsening mechanisms are significantly slowed down. The concurrently-existing precipitation kinetics of Ω and S have provided an in-depth understanding of the higher strength of the aged 7A sample.
Chen et al. (Sun,) studied this question.