Key points are not available for this paper at this time.
A modelling procedure was developed which is applicable to crack growth in notched components subjected to multiaxial fatigue for materials with different microstructures. An algorithm for crack growth, in a microstructure that was modelled as hexagons, was established as a competition between growth by crack linkages during the crack initiation and propagation stages and the propagation of a dominant crack as a single crack. Analytical results simulated by using the developed model were compared with experimental results from fatigue tests which had been conducted using notched specimens of pure copper, carbon steel and two kinds of titanium alloy. Cracking morphology, which was experimentally observed to depend on the microstructure and the loading mode, was well simulated using the present model. The fatigue failure life of a notched specimen was statistically estimated by a Monte Carlo procedure based on the model. The simulated life with a statistical scatter‐band almost coincided with the experimental data.
Hoshide et al. (Sun,) studied this question.