Key points are not available for this paper at this time.
This paper focuses on the design and experimental evaluation of a hydraulically actuated robot leg. The evaluation of the leg prototype is an important milestone in the development of HyQ, a Hydraulically actuated Quadruped robot. The prototype features two rotary joints actuated by hydraulic cylinders and has a mass of 4.5kg. We performed several experiments with the leg prototype attached to a vertical slider to tests the robustness of the mechanical design and the hydraulic actuation system. Besides the experimental evaluation of the hydraulic components, we also extensively studied the sensor data of the leg during periodic hopping. The results show that hydraulic actuation is suitable for legged robots because of its high power-to-weight ratio, fast response and ability to cope with high impact force peaks. Furthermore, we compare the cylinder force data obtained by the load cell with the calculated value based on the cylinder pressures to analyze if it is possible to eliminate this sensory system redundancy in the future. Through these studies, weaknesses of the design were identified and suggestions on how to improve them are presented.
Semini et al. (Fri,) studied this question.