In isolated rat left ventricular papillary muscles, the initial mechanical efficiency was 28.1+/-1.2%, based on a net mechanical efficiency of 13.3+/-0.7%.
The initial mechanical efficiency of isolated rat cardiac muscle is approximately 28%, which is consistent with estimates based on net mechanical efficiency rather than previous reports of over 60%.
The aim of this study was to determine whether the initial mechanical efficiency (ratio of work output to initial metabolic cost) of isolated cardiac muscle is over 60%, as has been reported previously, or whether it is approximately 30%, as suggested by an estimate based on the well-established net mechanical efficiency (ratio of work output to total, suprabasal energy cost) of 15%. Determination of initial efficiency required separation of the enthalpy output (i.e. heat + work) into initial and recovery components. The former corresponds to energy produced by reactions that use high-energy phosphates and the latter to energy produced in the regeneration of high-energy phosphates. The two components were separated mathematically. Experiments were performed in vitro (30 degrees C) using preparations dissected from rat left ventricular papillary muscles (N=13). Muscle work output and heat production were measured during a series of 40 contractions using a contraction protocol designed to mimic in vivo papillary muscle activity. Net mechanical efficiency was 13.3+/-0.7%. The total enthalpy output was 2.16 times greater than the initial enthalpy output, so that initial mechanical efficiency was 28.1+/-1.2%.
Barclay et al. (Tue,) reported a other. In vitro contraction protocol mimicking in vivo activity was evaluated on Initial mechanical efficiency. In isolated rat left ventricular papillary muscles, the initial mechanical efficiency was 28.1+/-1.2%, based on a net mechanical efficiency of 13.3+/-0.7%.