What question did this study set out to answer?

This research aims to characterize the laminar-turbulent transition in helically coiled reactors (HCRs) using advanced velocity measurement techniques.

July 12, 2026Open Access

Characterization of the laminar–turbulent transition in helically coiled reactors: an experimental study using high-speed PIV and LDV

CMConrad MüllerRWTH Aachen University PKPéter KovátsOtto-von-Guericke University Magdeburg DTDominique ThéveninOtto-von-Guericke University Magdeburg

Key Points

This research aims to characterize the laminar-turbulent transition in helically coiled reactors (HCRs) using advanced velocity measurement techniques.
Conducted high-speed PIV measurements across Reynolds numbers from 500 to 9500.
Analyzed visual flow patterns, turbulence intensity, and statistical vorticity metrics as indicators of flow transition.
Performed spectral analyses to estimate turbulence characteristics including dissipation rates and Kolmogorov scales.
Turbulent structures initially observed at Re=2400 with additional vortex presence at Re=6000.
Transition characterized between Re=2400 to 4800 as determined by standard deviation and turbulence intensity metrics.
Full turbulence established at Re=7000 based on power spectral density analysis.

Abstract

Helically coiled reactors (HCRs) are increasingly employed in industrial applications due to their enhanced heat and mass transfer characteristics, compact design and improved mixing performance compared to straight tube systems. Despite their widespread use, a significant gap remains in the literature regarding the transition from laminar to turbulent flow within such geometries. Most existing studies rely primarily on pressure drop measurements for flow characterization, while comprehensive velocity-based investigations remain scarce. In this work, a detailed qualitative and quantitative characterization of the laminar–turbulent transition in a helical reactor is presented. An experimental set-up was developed to perform high-speed particle image velocimetry (PIV) measurements across a wide range of Reynolds numbers (Re = 500…9500). Various markers are employed to identify and analyse the onset of turbulence: visual flow patterns represented through carpet plots and pseudo-3D visualizations, statistical quantities such as standard deviation and turbulence intensity and the root mean square (RMS) of vorticity as a Lyne vortex indicator. Additionally, spectral analyses are conducted using power spectral density (PSD) evaluation, along with the estimation of dissipation rates and Kolmogorov time and length scales to assess the small-scale turbulent structures. Pseudo-3D visualizations reveal first turbulent structures at Re₂ₑ₈ₓ=2400 and a constant presence of additional vortex structures at Re₂ₑ₈ₓ=6000. Analysis of the standard deviation and turbulence intensity reveals a transition between Re₂ₑ₈ₓ=2400 4800. The frequency analysis with PSD shows full turbulence at Re₂ₑ₈ₓ=7000. Vorticity analysis and dissipation rates support a transition area between Re₂ₑ₈ₓ=2400 5000. These various ranges reveal that predicting exactly the transition point of course depends on the retained definition, with many different approaches documented in the literature. Keeping this in mind, it is still possible to give a lower boundary for the onset of transition around Re₂ₑ₈ₓ=2400 and an upper boundary to a fully turbulent flow within the whole cross section at Re₂ₑ₈ₓ=7000 for the considered geometry (curvature ratio =0. 847, inner tube diameter d₈=10 mm).

KI fragen

Bookmark

View Full Paper