Key points are not available for this paper at this time.
We have lased the new material, LiSrAlF6:Cr3+ (Cr3+:LiSAF). The single crystals were grown by the horizontal zone melting technique. The spectroscopic properties of Cr3+:LiSAF are similar to those of other low-field Cr3+-doped systems, although the emission cross section is strongly π polarized and is also somewhat larger than has been measured for other fluoride hosts. The free-running lasing wavelength of Cr3+:LiSAF is 825 nm, and the tuning range extends from at least 780 to 920 nm. Using Kr laser pumping, we obtained slope efficiencies of 36% and 14% by utilizing output couplings of 4.8% and 0.8%, respectively. On the basis of these results, the extrapolated maximum efficiency of 53% is determined, to be compared to the quantum defect-limited value of 78%. It is concluded that a moderate level of excited state absorption (ESA) loss is responsible for the reduced efficiency of the Cr3+:LiSAF system. This contrasts with the related results previously obtained for LiCaAlF6:Cr3+, where it was concluded that the effects of ESA were negligible IEEE J. Quantum Electron. QE-24, 2243 (1988).
Payne et al. (Tue,) studied this question.