ABSTRACT Aim To evaluate the effect of electropolishing on the mechanical properties of One RECI and One Curve mini nickel‐titanium (NiTi) instruments by comparing electropolished and non‐electropolished versions of each instrument type. Methodology Electropolished and non‐electropolished One RECI (reciprocating) and One Curve mini (rotary) NiTi instruments, all manufactured with identical geometry and heat treatment, were evaluated. Instrument design was analysed by light microscopy and scanning electron microscopy, while metallurgical characterisation was performed using energy‐dispersive X‐ray spectroscopy (EDS) and differential scanning calorimetry (DSC). Mechanical performance was assessed through torsional resistance, bending and buckling load, surface microhardness, and cutting efficiency. Statistical comparisons were performed using the independent samples t‐test or the Mann–Whitney U ‐test, with significance set at p 0.05). Surface microhardness and cutting efficiency remained unaffected by electropolishing in both systems ( p > 0.05). Conclusions Electropolishing improved the flexibility of both One RECI and One Curve mini NiTi instruments without compromising their surface microhardness or cutting efficiency. However, its impact on torsional resistance was system‐dependent, resulting in reduced strength only in the reciprocating One RECI instruments.
Vieira et al. (Mon,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: