To improve the uniformity and precision of soybean seeding, this study designed a high-speed airflow-assisted seeding system for the pneumatic drum-type high-speed precision seed-metering device. The system accelerates seed delivery through airflow and ensures precise seed placement using a seed press wheel. Computational Fluid Dynamics (CFD) and Discrete Element Method (DEM) coupling simulations were employed to analyze the seed motion trajectory, collision process, and velocity changes. Key design parameters of the airflow-assisted delivery system were optimized, including a tube diameter of 16 mm, a curved section radius of 80 mm, a seed delivery angle of 33.65°, and a press wheel diameter of 254 mm. The simulation results indicated that the relative position between the seed delivery tube and the seed drum significantly impacts seed trajectory and uniformity. Lowering the tube to align with the seed velocity direction minimized collisions and enhanced seed spacing consistency during high-speed operation. Increasing inlet air pressure improved seed distribution uniformity by accelerating seeds within the tube, reducing travel time and collisions; a 500 Pa pressure increase raised the maximum flow velocity by approximately 5 m/s. However, seed acceleration exhibited diminishing returns: pressure increase from 2.5 kPa to 3.5 kPa increased seed speed by 2.1 m/s, while a further increase to 4.5 kPa only added 1.1 m/s. The optimal inlet pressure for efficient energy transfer and seed acceleration was approximately 3.5 kPa. The press wheel played a crucial role by dispersing the impact force when seeds contact the soil, which achieved high capture rates above 94.0% across the seed drum rotary speed range of 11 to 19 rpm. This research provides theoretical and experimental support for the optimization of high-speed airflow-assisted seeding systems, offering significant practical value for large-scale agricultural production by enhancing seeding efficiency and quality.
Ding et al. (Tue,) studied this question.