Sorbents based on foamed phosphate glass for collecting petroleum oil products from contaminated soils and water surfaces

Relevance. The need to clean from pollution soils and water areas contaminated with oil and chemical industry wastes. Physico-chemical methods are one of the effective ways of cleaning, provided that sorbents are applied in time to collect contaminants from the surface of water areas and landscapes. Sorption is the most efficient and cost-effective method for relatively small scale pollution. Despite the variety of existing sorbents, in most cases when cleaning up accidental spills, first of all, economic benefits and oil capacity value of the sorbent are guided. However, such essential criteria as: 1) main purpose (type of polluted surface and nature of pollution); 2) physical and chemical properties, including structural characteristics and acid-base adsorption centers; 3) peculiarities of oil or other pollutants adsorption. Taking into account these factors, it is possible to develop and improve the formulation of sorbents based on phosphate foams. Introduction of various modifying additives into material composition is likely to expand their field of application. Aim. Development of formulation and technological features of obtaining new phosphate sorbents in relation to their intended purpose: for collecting oil and petroleum product spills from soil or water surfaces. Methods. Gravimetric, microscopic spectroscopic, statistical and comparative methods. Results and conclusions. The authors have compared sorbents no. 1 and 2 in terms of physical and chemical properties, morphology and cleaning efficiency. Based on our laboratory studies, we concluded that sorbent no. 1 is better suited for sorption from aqueous surfaces and sorbent no. 2 is better suited for soil cleaning. Both sorbents have the potential to improve their technological properties. This allows refining the formulation of these materials with further testing in laboratory and field conditions, for example, at oil spill sites. For this purpose, it is possible to change the material composition using a different foaming agent, applying modifying additives and varying the temperature mode of firing. Development of new compositions and methods of sorbent foaming will make it possible to select optimal characteristics for each type of contamination. The author proposed as well to create phosphate biosorbent obtained by immobilization of fungi and bacteria on the surface of highly porous carrier. In this case, after sorption of pollution, adsorbed substances will undergo biodegradation with the formation of safe products, and the sorbent will perform the role of fertilizer.