Key points are not available for this paper at this time.
Owing to the superior cooling performance of the droplet impingement process, the spray cooling is widely used in various industries including aerospace, e-motors, data centres and so on. In the present study, the morphological evolution and heat transfer characteristics of vertical and oblique impacts on the heated surface were investigated experimentally and numerically. A droplet generation system and a substrate heating system were designed to observe continuous vertical and oblique droplets impinging on the hot surface by a high-speed camera. The coupled Level Set and VOF (CLS-VOF) model and adaptive mesh refinement technique were used to establish a mathematical model for a train of micro-sized droplets impinging on the heated surface, which was validated by experimental data. The film that spreads on the surface exhibits asymmetry due to the horizontal velocity of the droplets. When continuous droplets impinge vertically on the heated wall, the evolution of the crown and the wall temperature appear periodic. The effects of impingement angles on morphological patterns and heat transfer of a train of micro-sized monodispersed droplets with the same Weber numbers were analyzed further. The results indicated that with a smaller angle of impingement, the crown is more likely to splash, and the crown asymmetry is less obvious.
Ding et al. (Wed,) studied this question.