Key points are not available for this paper at this time.
State-of the-art (SOA) lithium-ion batteries (LIBs) being developed for transportation applications contain a transition metal (TM) oxide cathode and a graphite anode; both serve as host-matrices to house lithium ions during battery operation. The cathodes typically contains Li 1+x Ni a Co b Al c O 2 (NCA) or Li 1+x Ni a Mn b Co c O 2 (NMC) oxides: both oxide chemistries contain Co, which is known to preserve the layered structure during lithium extraction/insertion reactions. However, the possibility of a global Co shortage and soaring costs has galvanized the LIB community to explore sustainable cathode chemistries, while maintaining cell performance (energy/power densities), safety and cycle/calendar life. In this context the U.S. Department of Energy (DOE) initiated the Earth-Abundant Cathode Active Material (EaCAM) Program for the development of sustainable cathode chemistries, based on earth-abundant elements. Materials of particular interest to the EaCAM program are the x Li 2 MnO 3 ● (1-x) LiMn a Ni b Z c O 2 composites; here Z refers to various elements that could be included in the oxide structure. These lithium- and manganese- rich materials are considered attractive candidates because of their high specific capacities, zero cobalt content, and lower costs compared to the SOA oxides. We have been examining the electrochemical behavior of cells with these oxides, with a particular focus on the 0.3 Li 2 MnO 3 ● 0.7 LiMn 0.5 Ni 0.5 O 2 (LMR) compound. During this presentation, we will show results from battery cells, containing LMR cathodes and either graphite or lithium-titanate anodes. In particular, the use of a microprobe reference electrode to monitor the cathode and anode potentials will be discussed. The effect of activation on cell performance and the performance loss characteristics during cycling will be highlighted. We will show how cell impedance is affected by voltage hysteresis and the voltage fade that results from cycling. Our ultimate goal is to identify constituents and mechanisms responsible for the cell performance loss and develop solutions to mitigate this degradation. Acknowledgement: This document has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory (“Argonne”). Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357.
Badami et al. (Fri,) studied this question.