Approaching the Multiphase Interface of Ir-Based PEM Electrolyzers Using Operando ‘Tender’ X-Ray AP-XPS

Electrochemical water splitting is a promising pathway for the renewable production of hydrogen as an alternative fuel and chemical feedstock. Yet, the process is plagued by slow kinetics of the essential oxygen evolution reaction at the anode. Further, large-scale hydrogen production from such devices will require reduced platinum group metal (PGM) loadings (often iridium-based anodes) and/or new materials due to factors such as PGM scarcity, cost and loss during operation. In the hopes of enabling progress of rational design for OER catalysts, effective characterization of the electrode-liquid interface is crucial. Synchrotron-based X-ray Photoelectron Spectroscopy (XPS) offers a versatile way to obtain surface chemical and elemental characterization of these materials. The use of X-rays in the ‘tender’ regime (~2-6 keV) allows for deeper probing than the conventional ‘soft’ x-ray (< 2000 eV) set up that is common at synchrotrons and lab-based sources. The photoelectrons generated from tender x-rays have enough energy to penetrate tens of nanometers through low density components such as a layer of liquid or polymeric electrolyte. This opens the door to access the chemistry at the interface of liquid and ionomer electrolyte-electrocatalyst materials. With the use of a fully operational two-electrode system, we are able to study these membrane electrode assemblies under active water splitting conditions. My talk will explain our specific approach, which is often crucial for successful collection of accurate data, highlighting elements of cell design and experimental setup that are helpful for this process. I will also show recent AP-XPS results on iridium-based polymer electrolyte membranes for water splitting. With application of elevated potential, we can correlate the iridium valency and surface species with the appearance of product traces in a mass spectrum. Figure 1