Key points are not available for this paper at this time.
The integration of inverter-based renewable energy sources into power grids presents a unique challenge: a reduction in grid inertia, leading to potential frequency stability issues. This paper introduces an innovative approach to address this challenge, focusing on the dynamic role of wind power plants equipped with dual-fed induction generators (DFIG). Unlike traditional methods that rely on fixed inertia control strategies and wind power droop coefficients, our method offers a dynamic solution tailored to the fluctuating nature of grid frequency dynamics. We propose a novel variable inertia support mechanism, coupled with an optimized power point tracking control and strategic reserve, to maximize the effective use of wind power reserves without waste. Additionally, we account for the inherent uncertainties in wind power generation, enhancing the frequency support capabilities of wind turbines through a fast frequency response strategy. A key feature of our approach is the application of an advanced piecewise linearization fitting method to establish a robust frequency nadir constraint. This is integrated into a two-stage robust frequency security-constrained unit commitment model, enabling optimal real-time decision making for frequency stability in wind power plants. The efficacy and practicality of our proposed method are verified through a detailed case study on a modified IEEE 39-bus system and a hardware-in-the-loop experiment. Compared with the traditional fixed parameter control method, the cost is reduced by approximately 0.42%, while the linearization error at frequency nadirs remains within the range of -4% to 1.5%. • The upper bound of the control parameter for variable virtual inertia is deduced. • A strategic reserve method is proposed considering wind uncertainties to improve the virtual inertia. • An Enhanced-PWL method is derived to eliminate redundant fitted samples for linearization accuracy improvement. • A two-stage robust FCUC model is proposed considering the variable fast-frequency support of DFIG-WTs.
Han et al. (Wed,) studied this question.