Key points are not available for this paper at this time.
One of the methods to reduce long-term excessive plastic waste is the development and use of composite materials based on biodegradable polymers and natural fibres. Composites with natural fibres can exhibit very good mechanical properties, and the presence of natural fibres can significantly accelerate the degradation of the material. This study aimed to manufacture and analyse the biodegradation process of composites based on biodegradable polylactide (PLA) filled with flax and sheep wool fibres. The effect of flax and wool fibres and their content on the degradation rate compared to that of pure PLA was investigated. The degradation progress and properties of the composites were studied using an optical microscope, SEM, measurement of surface roughness, and contact angle. Additionally, flexural strength tests, a dynamic mechanical analysis (DMA), and a thermogravimetric analysis (TGA) were conducted. The effect of natural fibres on the phase transition and degree of crystallinity was analysed using differential scanning calorimetry (DSC). The results showed that PLA degrades only under UV light, but not in the composter simulating the natural environment. However, the incorporation of both types of fibres accelerated degradation of PLA/fibres composites in soil. Flax fibre composites exhibited better mechanical properties than pure PLA. For composites with wool fibres, although they showed a significant acceleration of the degradation process in the soil, their large content in the composite caused a reduction of mechanical properties. This research showed the positive effect of the addition of natural fibres on the biodegradation of PLA.
Szczepanik et al. (Thu,) studied this question.