Key points are not available for this paper at this time.
Abstract. Fluctuating process conditions, such as lubrication, can disturb the production process and lead to faulty components that have cracks or wrinkles. Real-time identification of process parameters can detect deviations in sheet forming operations and enable the process parameters to be adjusted. To increase process robustness, closed-loop control is often used to monitor and influence the material draw-in, which corresponds to the material flow and can be measured by camera systems inside the deep-drawing press. The aim of this work is to develop a control concept that can predict the optimum blank holder force by estimating the coefficient of friction based on the material draw-in of the last stroke. Using a cross-die geometry, it is shown how the material draw-in can be determined experimentally by means of a camera system and numerically by FE simulations. Finally, artificial neural network-based models are trained through simulations and are subsequently tested on a numerical case study in which the coefficient of friction is changed as a disturbance variable and must be compensated for. The widely applicable control concept has the potential to incorporate additional softsensors, for example to determine material properties, and other target variables, such as the punch force, into the optimization algorithm.
Sebastian Thiery (Fri,) studied this question.