Key points are not available for this paper at this time.
Aiming at the problem that the current Anti-lock Braking System (ABS) control algorithm can not make full use of the ground friction to complete the braking when emergency braking on complex roads, an ABS sliding mode control method based on road surface identification is proposed. Combined with the in-wheel motor of in-wheel motor electric vehicle, a coordinated control method of motor regenerative braking and mechanical friction braking is designed. Based on the neural network control method, the road friction coefficient is estimated to realize the identification of typical roads and dynamically obtain the optimal slip ratio of different roads. The ABS sliding mode controler is designed with the optimal slip ratio and the actual slip ratio as input, and the saturation function is used to replace the symbol function in the traditional sliding mode control to weaken the chattering problem, and then the ABS controller is designed. The research results show that compared with the traditional ABS sliding mode controller, the designed ABS neural network sliding mode controller has the following advantages: 1. Through the identification of tire-road friction coefficient by neural network, the real-time performance and road adaptability of ABS controller are improved; 2. When the braking simulation is carried out at a given speed, the braking time is reduced by about 1.03 % and the braking distance is shortened by about 1.01%; 3. The identification of tire-road friction coefficient is realized, which weakens the chattering problem of traditional sliding mode control and improves the stability and robustness of ABS controller.
Fan et al. (Wed,) studied this question.