Key points are not available for this paper at this time.
Understanding complex aerodynamics/combustion interactions across major components of aeroengines, including the compressor, combustor and turbine is demanded for the improved performance of advanced propulsion systems. This study employs high-fidelity CFD simulations to investigate the coupled compressor-combustor interactions for the improved performance of a micro gas turbine. In the prototype configuration, the deficient compressor/combustor matching causes insufficient air/fuel mixing and delayed combustion inside the combustor chamber. By reducing the flow area of the compressor and redistributing the air holes on the combustor chamber, a stable united recirculation structure is formed to promote air/fuel mixing and efficient combustion, achieving a over 50% decrease in OTDF and RTDF at the combustor exit and a total 20% decrease of pressure loss in the entire engine through-flow. Compared with the single-component combustor simulation, the coupled compressor-combustor results exhibit stronger turbulence mixing, increased temperature uniformity inside the combustor chamber. Compared with the single-component compressor simulation, the compressor in the multi-component simulation shows the reduced flow angle and Mach number at the compressor outlet, leading to increased stall critical angles and delayed flow separation at the compressor diffuser and vanes. This demonstrates that the added combustor endues the compressor with an expanded operating range and a lower mass-flow rate instability boundary. This work implies that 3D multi-component CFD simulation is necessary to understand the aerodynamic and combustion interactions and improve the multi-component matching in gas turbine engines.
Su et al. (Thu,) studied this question.